How to check RAM (size, speed, type, part, form factor) on Windows 11

If you take a Windows xi laptop or desktop computer, understanding the system retentiveness — or RAM (Random Access Memory) — specifications may come in handy to troubleshoot problems with technical support or confirm the changes after tweaking the settings in the Unified Extensible Firmware Interface (UEFI).

Also, if the device is due for an upgrade, understanding the RAM details can help determine the brand, speed, size, and other data yous may need to become the right modules to improve arrangement performance.

Whatever the reason it might be, you can use Command Prompt on Windows 11 to find out all the information quickly without using Job Director or third-party tools.

In this Windows 11 guide, nosotros will walk you through the steps to observe out the specifications for the retentivity installed on your estimator.

How to check RAM specs with Control Prompt on Windows 11

Using Command Prompt, you lot tin decide many details about the system retention installed on the calculator, including manufacturer, part and serial number, chapters information, speed, type, form factor, and more.

Although you can utilise Command Prompt to query many unlike details well-nigh the system memory, some data may non be bachelor depending on the hardware.

Check manufacturer

To find out the memory manufacturer, use these steps:

Open Showtime.
Search for Command Prompt, right-click the top result, and select the Run as administrator option.
Type the following control to decide the memory manufacturer proper noun and press Enter:

wmic memorychip get devicelocator, manufacturer

Source: Windows Central
Confirm the retention manufacturer name nether the "Manufacturer" column.

Check part number

To determine the part number for each of the retentiveness modules, use these steps:

Open Start.
Search for Command Prompt, correct-click the height result, and select the Run as administrator option.
Type the following command to decide the memory part number and printing Enter:

wmic memorychip get devicelocator, partnumber

Source: Windows Central
Confirm the product number under the "PartNumber" cavalcade.

Check serial number

Open Kickoff.
Search for Command Prompt, right-click the tiptop upshot, and select the Run as administrator choice.
Type the following control to go the RAM stick's serial number and press Enter:

wmic memorychip get devicelocator, serialnumber

Source: Windows Central
Confirm the product series number nether the "SerialNumber" cavalcade.
(Optional) Type the post-obit command to find out the concrete location of the stick on the motherboard and press Enter:

wmic memorychip get banklabel, serialnumber

Source: Windows Fundamental

Check capacity

On Windows 11, yous can as well use different commands to determine the total system capacity or capacity per module.

Make up one's mind capacity per module

To detect out the corporeality of retention available in each stick, utilise these steps:

Open Start.
Search for Command Prompt, right-click the height result, and select the Run as administrator option.
Type the following command to make up one's mind each module capacity and press Enter:

wmic memorychip become devicelocator, chapters

Source: Windows Key
Confirm the amount of RAM per module nether the "Chapters" cavalcade.

Since the capacity is returned in bytes, y'all have to split the number by 1,073,741,824 (one gigabyte in bytes) to convert the data into gigabytes.

Determine chapters total

To determine the total amount of RAM installed on a Windows 11 device, utilise these steps:

Open Start.
Search for Command Prompt, right-click the acme effect, and select the Run as administrator option.
Type the following command to decide the total amount of RAM installed on the reckoner and press Enter:

wmic computersystem go totalphysicalmemory

Source: Windows Central
Confirm the amount of RAM per module under the "Capacity" column.

To convert the information to gigabytes, you must separate the number by ane,073,741,824 (1 gigabyte in bytes).

Check speed

To detect out the speed of the retention modules, use these steps:

Open Start.
Search for Control Prompt, right-click the superlative consequence, and select the Run as ambassador option.
Type the following command to check the retention speed and press Enter:

wmic memorychip get devicelocator, speed

Source: Windows Central
Confirm each of the memory module's speed under the "Speed" column.

Check type

To determine memory type (such every bit DRAM, DDR4, RDRAM, etc.), use these steps:

Open Start.
Search for Command Prompt, right-click the meridian event, and select the Run equally ambassador choice.
Type the following command to check the memory type and press Enter:

wmic memorychip become devicelocator, memorytype

Source: Windows Fundamental
Confirm retentiveness blazon under the "MemoryType" cavalcade.

Supported memory types

Hither's the list with the retentivity types that the command can detect:

0: Unknown.
1: Other.
2: DRAM.
iii: Synchronous DRAM.
iv: Cache DRAM.
5: EDO.
6: EDRAM.
seven: VRAM.
eight: SRAM.
9: RAM.
x: ROM.
11: Flash.
12: EEPROM.
thirteen: FEPROM.
fourteen: EPROM.
xv: CDRAM.
16: 3DRAM.
17: SDRAM.
18: SGRAM.
nineteen: RDRAM.
twenty: DDR.
21: DDR2.
22: DDR2 FB-DIMM.
24: DDR3.
25: FBD2.
26: DRR4.

Check grade factor

To decide the retentiveness sticks course factor (such as DIMM, SODIMM, etc.) on Windows 11, utilize these steps:

Open Start.
Search for Control Prompt, correct-click the top result, and select the Run as ambassador choice.
Type the post-obit control to check the retentivity class cistron and press Enter:

wmic memorychip get devicelocator, formfactor

Source: Windows Central
Confirm the memory form factor under the "FormFactor" column.

If the output is eight, the estimator uses DIMM modules (usually available on desktops). Otherwise, if the control output the number 12, the device uses SODIMM modules (commonly used on laptops).

Supported grade factor

Here'southward a list with the form factors that the command can detect:

0: Unknown.
1: Other.
two: SIP.
iii: DIP.
iv: Nada.
5: SOJ
half dozen: Proprietary.
vii: SIMM.
8: DIMM.
9: TSOP.
10: PGA.
eleven: RIMM.
12: SODIMM.
13: SRIMM.
fourteen: SMD.
15: SSMP.
16: QFP.
17: TQFP.
18: SOIC.
19: LCC.
20: PLCC.
21: BGA.
22: FPBGA.
23: LGA.
24: FB-DIMM.

Check total specs

Y'all can use the previous command to find specific information about the memory modules individually. All the same, you tin likewise query all the retentivity specs with a single command on Windows 11.

To view all the memory details, then use these steps:

Open Start.
Type Command Prompt, right-click the acme effect, and select the Run every bit ambassador option.
Type the following control to view all the retentivity details and press Enter:

wmic memorychip list full

Source: Windows Cardinal
Confirm the specs for each module installed on the device.
(Optional) Type the following command to view only the specific details and press Enter:

wmic memorychip get devicelocator, manufacturer, partnumber, serialnumber, capacity, speed, memorytype, formfactor

Source: Windows Central
Confirm the retention details.